Compact Structure Anchor Drilling Rig DTH Hammer Drilling Carbide Bit Drilling
YG-100 drilling rig is a full hydraulic drill with skid mounted which is used for drilling anchor holes in deep base pit of high building, anchor and reinforce side-slope for water conservatory project, water power station project, railways and highways . Especially used for drilling anchor holes in high position side-slope protection and drainage holes.
Extension mechanism in the output spindle of top drive power head protects drilling tools effectively , It can increase the hole inclination angle range and drill elevation angle hole, while setting the top drive power head and hole top plate toward the opposite direction.
A set of front-mounted adjustable columns on drill frame is used for adjusting the height of mast front-end, which makes it convenient to align with working position.
Rig structure is separate group design, It is composed of main set, control panel and pump which are connected together with flexible joint. So it features simple in structure, assures good disassembling, rapid and convenient mount and transport, best working environment and lower labor strength.
It has great drilling capability, wide range of application, rapid drilling speed and high drilling efficiency.It is composed of main set, control panel and pump which are connected together with flexible joint. So it features simple in structure, good disassembility and convenient to mount and transport.
| drilling depth | 60-120m |
| Drilling diameter | ¢ 250- ¢ 110mm |
| drill diameter | ¢ 114 × 1500, ¢ 89 × 1500 (mm) |
| Drilling dip | 0-180 ° |
| power head output speed (positive and negative) | 5-42 (low) r / min 5-90 (upscale) r / min |
| Rated output torque of the power head | 6000NM |
| Power head stroke | 1800 mm |
| mast slip stroke | 500 mm |
| Power head lifting force | 55KN |
| Power Head biggest feeding force | 40KN |
| hydraulic system rated pressure | 18Mpa |
| Motor Power | 37KW |
| Host Dimension | 3450 × 1750 × 1500 (mm) |
| Rig weight | 2500Kg |
| maximum disintegration weight | 300Kg |
1. The power head has large torque,long stoke and high working efficiency.
2. Operating drill through the centralized control panel ensures assure safety operation and on-site cleanliness.
3. Rig structure is separate group design:main frame,pump station and control station, it assures good disassembling, rapid and convenient mount and transport, best working environment and lower labor strength.
4. Transmission has two speed range high and low. It can meet the requirements of both DTH hammer drilling and carbide bit drilling.
Product Tags:
|
|
Compact Structure Anchor Drilling Rig , Drilling Rig Equipment Carbide Bit Reinforced Images
|
